DIY Level 2 EV Charger Install With Load Management

This indoor/outdoor unit is for a hard wire install which allows you to use a 60A breaker and get the full 11kW charging speed. It comes with the Emporia load management sensors allowing the system to automatically adjust the charging load to prevent overload on your breaker panel.
Use the link below and the discount code "EVERYDAY50" for a $50 DISCOUNT on any purchase of $500 or more! (Code is valid through July 1, 2025)

This indoor/outdoor unit is for installations where a 240V outlet is available. Plugged (up to 40A) with a NEMA 14-50P plug and a 50A breaker for 40A charge. Charging speed about 10kW. IF YOU DON'T USE AN INDUSTRIAL OUTLET YOU COULD START A FIRE! Watch the video above on how to install the correct outlet. It comes with the Emporia load management sensors allowing the system to automatically adjust the charging load to prevent overload on your breaker panel.
Use the link below and the discount code "EVERYDAY50" for a $50 DISCOUNT on any purchase of $500 or more! (Code is valid through July 1, 2025)

If you don't need load management you can save some money and still track your charging with this unit. This indoor/outdoor unit is for a hard wire install which allows you to use a 60A breaker and get the full 11kW charging speed.
Use the link below and the discount code "EVERYDAY50" for a $50 DISCOUNT on any purchase of $500 or more! (Code is valid through July 1, 2025)

If you don't need load management you can save some money and still track your charging with this unit. Link has hardwire and plug versions for Tesla Vehicles.

If you don't need load management you can save some money and still track your charging with this unit. Link has hardwire and plug versions for most EV's, it has the J1772 connector.

Monitor all the circuits in your house to understand how much power each device is using. You can also manage incoming solar. This is my favorite monitor and the one I use for all my analysis. You can add it independent from the EV charger system.
Use the link below and the discount code "EVERYDAY50" for a $50 DISCOUNT on any purchase of $500 or more! (Code is valid through July 1, 2025)

Monitor all the circuits in your house to understand how much power each device is using. You can also manage incoming solar. This is my favorite monitor and the one I use for all my analysis. You can add it independent from the EV charger system.

Heavy Duty Metal Wall Anchors with Self-Tapping Screws
These actually work and support heavy loads.

Great connector for large conductors.
5 Pack Black Multi Cable Connector Insulated Multi Tap Connector 3 Wire Port Splice Dual Sided Entry Prefilled with Oxide Inhibitor (2-14awg)

Industries JB-3958-KO Steel NEMA 1 Sheet Metal Junction Box 10 L x 8 W x 4 D, Gray
This was a little tight, you might want to go larger.

Ground bar for the junction box.

For short runs you can also use 6 AWG but it will get warm.

Use 6AWG for the Ground Conductor

1" conduit 90deg with access cover

Be sure to check your breaker panel to order the correct brand breaker. They are not universal.

SOMELINE Ferrule Crimping Tool Kit, Ratchet Wire Crimping Pliers for AWG23-7 with 23 Sizes Wire End Ferrule Terminals, Quadrilateral Wire Crimp Pliers with Ferrules Wire Kit Crimp Connectors

High strength light weight pull tape for fishing conductors through conduit.

If you are interested in the tools I use for solar projects here is a link.